snom technology AG / Knowledgebase

Browse by category:

Categories

	Phone Types (8) General phone type questions	Accessories (0) snom phone accessories	Features (0)
	Functions (0) Basic and Advanced Phone Functions	Configuration (0) Manual Configuration via Web/ Phone User Interface, Automatic provisioning via Mass Deployment, Plug'n Play	Hardware (0) Display, Headset, Power over Ethernet
	Interoperability (3) ITSP, SIP PBX	Networking (4) SIP, RTP, NAT, TLS, STUN etc.	Firmware (2) Updates, Downgrades
	Audio (7) Audio and DSP functions

Most viewed questions

How can I set the phone back to admin mode or factory defaults respectively?

This FAQ concerns: snom3xx, snom190: Switch between "User Mode" and "Admin Mode" Reset lost administrator password Reset lost...

24 Jul, 2007

Can I control my snom phone remotely?

Yes, the phone´s HTTP interface allows remote users to simulate the usage of the phone´s keypad and a few special features. Syntax:...

29 Jan, 2008

How can I enable multiple language support for snom300/320/360 using FW Version 7?

Due to the limited flash memory size on snom300/320/360 the multiple language support in FW Version 7 is provided the following way: small or...

05 Aug, 2008

Problems with Daylight Saving Time / Sommerzeit Probleme

While incorporating Daylight Saving Time USA for this year (2007), we discovered that this year our snom phones will change over to European Daylight...

11 Oct, 2007

Do snom phones provide a Telephony Application Programming Interface (TAPI)?

No, you need a TSP (TAPI service provider = Software interface which allows communication between TAPI applications and phone hardware). Since snom...

Not rated

24 Jul, 2007

Recently posted questions

Which types of internal or external phone directories are supported by snom phones?

This FAQ applies to: snom3x0 Firmware Version V6, V7 The following phone directory types are supported: Internal phone address...

Not rated

17 Apr, 2008

Why is the "Call Pick-up" tone not audible?

This FAQ applies to: snom300/320 FW Version 7 --> Advanced / Audio / Audio indication for Dialog Info pickup:ON This pickup tone on in...

14 Feb, 2008

How can I assign a different outbound proxy port on my m3?

This FAQ applies to: snom m3 FW V1.07 The specified server port will be used for both server port and outbound proxy port in the...

Not rated

04 Feb, 2008

Is it possible for a snom m3 handset to roam between different base stations?

This FAQ concerns: snom m3 Answer: No, roaming between snom m3 base stations is not supported. You can extend the DECT range using...

Not rated

23 Jan, 2008

Why is the "Menu" key in version 7.1.30 not working anymore?

This FAQ concerns: snom3x0 FW Version 7.X Answer: The preassigned "Menu" key event "F_MENU" is not used to call up the phone user...

22 Jan, 2008